HVHIPOT Automatic Calibrator of SF6 Density Relay (GDJD-3A)

Product Description

General Information

GDJD-3A SF6 gas Density Relay Calibrator is automatic calibrator, which uses embedded microprocessor to proceed performance calibration for all kinds of SF6 gas density relay. It is also a portable device which can make standard conversion for SF6 gas pressure at any environmental temperature. This device is mainly used for SF6 gas products production, maintenance and monitoring in power system.

Features

1. Automatically calibrate density relay and pressure gauge.

2. Compact design, small size, and light weight, easy to carry.

3. Color LCD screen, WINDOWs menu.

4. The power supply has UPS function, suitable for field operation.

5. With mini-printer, to print test result directly.

6. Good sealing property, do not waste SF6 gas during calibration.

7. The two ends of connection pipe has fast check valve, easy operation and avoid water and air entering into the pipe. No need to dismantle most of density relay to calibrate directly.

8. There is automatic voltage protector for sampling point. If sampling point clip misconnecting with 220V voltage, it will not destroy device.


Functions

1. Automatically measure pressure when SF6 gas density relay alarm or disalarm at any environmental temperature. It also can convert it to standard pressure at 20ºC, to realize alarm performance calibration.

2. Automatically measure pressure when SF6 gas density relay interlock or relive interlock at any environmental temperature. It also can convert it to standard pressure at 20ºC, to realize interlock performance calibration.

3. If there is pressure gauge or density meter of tested SF6 gas density relay, it can calibrate the accuracy of pressure gauge or density meter.

4. Convert the SF6 gas pressure into standard pressure at 20ºC.

5. Convert the standard pressure at 20ºC into pressure at any temperature.

6. Set multiple measurement for one density relay. The measurement result is average value.


Technical Specifications
 

Power supply	AC/DC use, built-in rechargeable battery, AC 220V±10%, 50Hz.
Accuracy	Class 0.25
Display	3.5inch true color LCD screen.
Printer	Needle type microprinter
Measurement pressure range	0-1.0Mpa
Calibration pressure range	standard pressure 0-0.9Mpa at 20ºC.
Temperature range	-50ºC--100ºC
Dimension	258*240*88mm
Weight	about 2.5kg
Pressure resolution	0.0001Mpa
Temperature resolution	0.1ºC
Storage capacity	50-100pcs
Communication port	USB2.0

Accessories
 

Tester	1 piece
Connector	1 set, total 18pcs
Gas pipe for storage gas cylinder	2pcs
Sampling lead of calibration point	2pcs
Connection pipe of relay	1 piece
Inlet pipe	1 piece
Outlet pipe	1 piece
Charger	1 piece
Small cylinder	1 piece
USB data cable	1 piece
Printer	1 roll
Spanner	1 piece
YQD-6 Nitrogen pressure reducer	1 piece
User's guide	1 copy
Test report	1 copy