HVHIPOT Portable High Accuracy 3*500A Three Phase Electronic Thermal Relay Calibrator Thermal Relay Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 year
• Model NO.: GDJR-500S
• Power input: AC 380V, 50Hz
• Rated power: 3000VA
• Accuracy class: 0.5
• Transport Package: Standard Export Plywood Case
• Specification: ISO
• Trademark: HV Hipot
• Origin: Wuhan, China

Product Description

HVHIPOT GDJR-500S Three Phase Electronic Thermal Relay Tester 

 

Product Description

 

GDJR-500S Three Phase Electronic Thermal Relay Tester is mainly used for the setting and verification of various electrical equipment. With features of reasonable design, convenient operation and large output power, it is widely used in electric test sites of power system, railway, petrochemical, metallurgy and mining enterprises.

Standard compliance

IEC 255-8: 1990	Electric Relays Part 8: Thermal Electrical Relays
DL/T 624-2010	Technical Specification of Test Equipment Based on Micro-computer for Relaying Protection
DL/T 846-2004	General Technical Specifications for High Voltage Test Equipments
DL/T 596-2005	Preventive Test Code for Electric Power Equipment
GB50150-2016	Electrical Equipment Installation Engineering-standard for Hand-over Test of Electric Equipment
IEC 60529:2013	Degrees of Protection Provided by Enclosure (IP Code)
GB2900	Electro-technical terminology
IEC60060-1,2	High Voltage Test Techniques
IEC60071	Insulation co-ordination for High Voltage Transmission and Distribution Equipment

Features

1.3.1 Power Supply Voltage: 380V±10% 50HZ±1% Waveform Distortion Rate ≤5%

1.3.2 Ambient Temperature: -5ºC-40ºC

1.3.3 Ambient Humidity: ≤80%RH, no condensation, no instrument flickering

1.3.4 Altitude: ≤1000m

1.3.5 The operating environment should be free from obvious dust, smoke, corrosive, flammable gases, water vapor, and salt spray, and free from severe vibration.

Specification

2.1 Power Input: 380V±10%, 50HZ±1%, Three-phase four-wire system

2.2 Rated Power: 3*1KVA

2.3 Output Open Voltage: 2V

2.4 Current Output: 3*500A or 3*50A

2.5 Output Accuracy: 0.5 grade

2.6 Output Current Mode: True RMS continuously adjustable;

2.7 Output Waveform: Standard sine wave;

2.8 Output Voltage: 380V, 220V

2.9 Current Stability: 0.2%;

2.10 Current Waveform Distortion: THD 1%;

2.11 Measurement Range: 0.1ms---9999.9s, Accuracy: 0.1ms

2.12 Ripple Coefficient: <0.3%

2.13 Dimensions: 580*400*400mm, 50KG