HV Hipot Brand Handheld 2/4 Channel PD Detector

Product Description

HV Hipot Brand Handheld 2/4 Channel PD Detector

The GDPD-414H handheld Partial Discharge Detector adopts smart quick intelligent power test system (Soft No. 1010215, trademark registration number 14684481). HVHIPOT Company introduces international advanced PD detection technology to develop and produce. The portable high-efficiency partial discharge inspection tool for high-voltage insulation equipment. It can flexibly configure various sensors according to different products to be tested. TEV, ultrasonic and HFCT are suitable for partial discharge detection of high-voltage switchgear and ring network cabinet; ultrasonic and UHF are suitable for detecting the insulation state of GIS; ultrasonic and HFCT are suitable for testing the insulation state of the cable. The built-in expert diagnosis system can analyze the test data and judge the discharge energy and possible parts. It is widely used in electric power and railway.



Features
 

1. The whole machine adopts portable ABS engineering chassis. All PD detection hosts, tablets, sensors, chargers and signal cables are placed in the portable engineering chassis. The total weight is less than 5KG, easy for carrying and operating.
2. Portable PD signal processing host: self-developed high-speed sampling board, 4-channel synchronous data acquisition, signal processing, feature parameter extraction, data can be sent to the handheld terminal by wire and wireless.
3. Software system: analysis software based on ARM embedded system, display software based on windows system.
4. A data acquisition host can simultaneously configure 2/4 channels of the same or different sensors, and can simultaneously collect and analyze 2/4 channels of signals.
5. Handheld display panel: Uses an industrial-grade 8.1" 1280 x 800 IPS touch screen.
6. The software system judges the discharge energy and location according to the detection data, and can display the PRPS and PRPD maps, ellipse diagrams, discharge rate maps, QT maps, NT maps, PRPD cumulative maps-ϕ-Q-N maps of each signal channel, and can display amplitude and pulse number of each signal channel . And all the data can be stored.
7. Over-limit alarm: The software adopts three-color indication modes of red, yellow and blue, which indicates the severity of partial discharge and facilitates information reading.
8. Average trouble free time: over 50000hours
9. Safety performance: meets GB/T 19862-2005 general requirements for switchgear monitoring equipment.
10. Electromagnetic compatibility: 

Electrostatic discharge immunity meets level GB/T17626.2-20064 
Damping oscillator wave anti-interference degree meets GB/T17626.10-1998 level 3
Power frequency magnetic field immunity meets GB/T17626.8-2006 level 3
Impulse magnetic field immunity meets GB/T17626.9-1998 Level 3

1. Power supply: powered by 12V lithium battery, power consumption < 10W, sustainable operation for more than 7 hours.
2. Environmental conditions:

Storage temperature: -40ºC ~ +85ºC,
Working temperature: -20ºC ~ +60ºC,
Relative humidity: 5% ~ 95% without condensation at 35ºC

1. Lightweight and easy to carry, it is suitable for field use

Signal acquisition host weight <0.8kg

Specification
 

PD signal acquisition host:
CPU Working frequency	1.2GHz
Operating system	Linx embedded operating system
Wired network port	LAN network port
Wireless network port	Built-in wireless WiFi
System running memory	512M
System storage memory	256M
Data acquisition frequency	100MHz
Ultrasonic detection channel:
Measurement range	AE: 0-10mV; AA: 0-100dBuV
Frequency detection range	20~200kHz
UHF detection channel:
Detection frequency	300~1500MHz
Measurement range	-80 ~ -10dBm
Error	±1dBm
Resolution	1dBm
HFCT detection channel
Frequency range	0.5~100MHz
Error	±1dBm
Sensitivity	15mV/1mA
Dynamic Range	60dB
Measurement range	0-1000mV
Accuracy	1dB
TEV detection channel
Frequency range	3~100MHz
Error	±1dB/mV
Sensitivity	0.01mV
Measurement range	0-60dB/mV
Resolution	1dB/mV
Battery
Built-in battery	Lithium battery, 12V, 6000mAh
Use time	about 8 hours
Charging time	About 2 hours
Battery protection	Over-voltage and over-current protection
Battery charging
Rated voltage	12.6V
Charging output current	2A
Operating temperature	-20ºC-60ºC
Operating humidity	<80%
Handheld display terminal (industrial grade):
CPU	Intel Quad Core Atom Z3735F
GPU	Intel HD Graphic (Gen7)
Flash	32GB
RAM	2GB
Operating system	Windows10
Display	8.1 inch 1280×800 IPS screen
Network interface	Wifi and Bluetooth
Battery	3.7V 8500mAH polymer lithium ion battery
Size
PD acquisition host size	240mm*165mm*55mm
PD acquisition host weight	0.65kg
Display tablet terminal size	395mm*295mm*105mm
Display tablet terminal weight	0.85kg
Overall box size	570mm*360mm*240mm
Working environment
Working temperature	-20ºC~50ºC
Environment humidity	0~90%RH
IP level	54