HV HIPOT specializes in cable and harness testers cable fault test systems
General introduction
GD-4136L/H Cable Fault System is important tool to maintain all kinds of cables. It uses various detection way to test cable faults, which is suitable for different levels voltage power cables and communication cables.
The system contains below units:
- GD-2131L/H Impulse Generator
- GD4132 Cable Fault Locator
- GD-4133 Multi-pulse Cable Fault Tester
- GD-4133S Multiple Pulse Coupler
GD-2131L/H Impulse Generator is used to generate HV impulse when using impulse flashover method to detect high impedance fault.
GD4132 Cable Fault Locator main function is to locate poor insulation point, to detect circuit and depth of power cable.
GD-4133 Multi-pulse Cable Fault Tester is used to measure distance between cable faults. It is easy to operate and with friendly interface.
GD-4133S supplied pulse coupling signal for GD-4133 and isolate it from high voltage equipment.
Specifications
| Input power supply |
AC 220V, 50Hz |
| Output voltage |
DC 0-32kV (adjustable) |
| Rated power |
2kVA |
| Max.energy |
2048J, 4uF |
| DC flashover voltage |
32kV |
| DC flashover current |
63mA |
| Max.impulse current |
500mA |
| Discharging method |
DC HV, one time, cycle |
| Cycle discharging time |
3-6 seconds |
| Environmental temperature |
0-40ºC |
| Humidity |
<75% RH |
| Altitude |
<1000m |
| Insulation level |
A |
| Dimension |
430*540*410mm |
| Weight |
About 31kg |
Feature
1. Acoustic Magnetic receiving at the same time,
2. Strong anti-interference ability
3. With anti-noise headphone.
4. 320*240 LCD screen display
5. Built-in big capacity Li-battery, with fast charger.
6. Acoustic and Magnetic signal waveform display, signal and noise is easy to distinguish.
7. Using cursor to measure acoustic and magnetic delay, accurately determine fault point.
8. According to initial polarity of magnetic.waveform, it can locate and route detection.
Audited Supplier 
){kind=link}
){kind=link}