HVHIPOT GDF-3000 Portable DC Ground Fault Finder

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 year
• Model NO.: GDF-3000
• System voltage measurement range: 0V to 300V
• Voltage measurement resolution: 0.1V
• Signal frequency: 0.167Hz
• Detection signal voltage amplitude: 0 to 50V
• Detection signal current size: 0 to 2mA
• System grounding resistance measurement: 0 to 600Kohm
• Display mode: LCD
• Transport Package: Carton or Wooden Case
• Specification: ISO, SGS
• Trademark: HV Hipot
• Origin: Wuhan China
• HS Code: 9030899090
• Production Capacity: 2000PCS/Year

Product Description

GDF-3000 Portable DC Ground Fault Finder

Product Description

General
DC system ground Fault of the Power system is an Fault that incident and larger jeopardize for Power system, whether it is positive or negative ground Fault, all of those may cause safeguard maloperation or protection refused action, endanger the normal operation of the power system.

 

Features

DC system ground finder judge the system insulation situation and branch insulation fault point by system voltage to ground and leakage current of the various of the branches.
When test point is above the ground fault point, the finder will given the insulation Fault signal . When the test point is below the ground fault point , the finder will given the insulation normal signal . That can located the ground fault point.
DC ground finder include "DC System Analyzer" and "DC Fault Detector", Put the power line of  "DC System Analyzer" in the positive, negative and ground of DC system by marked. Turn on the DC Analyzer, the Analyzer will analyzed the insulation of DC system, and display the System voltage, Positive voltage to ground or Negative voltage to ground , Ac into DC state or AC voltage, Grounding impedance on the LCD. if it detected the insulation Fault of system, User can use the detector to located the ground point.
The "DC System Analyzer" and the "DC Fault Detector"  are through the wireless module for data communication, The Detector equipped with a high-resolution DC Clamp, realize the detection leakage current size of measured branch, at the same time, the Detector through the wireless module reads the grounding voltage signal from the Analyzer, through this voltage and current to achieve detected the insulation resistance of the measured branch.

Product Parameters

Specifications

(1) Using the environment
The environment temperature: -5ºC~+50ºC;
Relative humidity: Less than or equal to 90%;
(2) Wireless communication Specifications
Power of signal : ≤ 10dbm;
Signal band: 433Mhz;
Sensitivity: -106dBm;
Transmission distance: In the range of visibility, the reliable transmission from the ground 2m distance of 100m.
(3) Analyzer Specifications
Applicable DC system voltage levels: 48V,110V,220V
System voltage measurement range: 0V to 300V;
DC to the ground voltage measurement range: 0V to 300V;
AC to the ground voltage measurement range: 0V to 280V;
Voltage measurement resolution :0.1V
System grounding resistance measurement range: 0 to 600KΩ;
Grounding resistance measurement resolution: 0.1KΩ;
Display mode: LCD;
Detection signal current size: 0 to 2mA;
Detection signal voltage amplitude: 0 to 50V;
Signal frequency: 0.167Hz;
Detector Specifications
Under signal mode the branch insulation resistance detection range: 0 to 600KΩ(220V) ,0 to 300KΩ(110V),0 TO 60KΩ(48V);
Under no signal mode the branch insulation resistance detection range: 0 to 50KΩ(220V) ,0 to 25KΩ(110V),0 TO 10KΩ(48V);
Insulation resistance measurement resolution: 0.1KΩ;
Time waveform display:12s;
Current measurement range: ±50mA;
Current measurement resolution:0.01mA;
Display mode: LCD;
Direction display : up arrow indicate same direction and down arrow indicate inverse direction
Clamp size: Ф30mm;
 

Packing List
 

DC System Analyzer	1 pc
DC Fault Detector	1 pc
DC clamp	1 pc
AA  batteries	8 pcs
Charger	1 pc
Three core cable	1 pc
Instructions	1 pc
Certificate	1 pc
Warranty Card	1 pc
Suitcase	1 pc

 

Company Profile