GDCL - Impulse Current Generator (GDCL-10)

• Model NO.: GDCL-10
• Control: Manual Control
• Weight: 100-500Kg
• Power Source: AC Meter
• Transformer: AC 15kv/500va
• Rectification: Half-Wave Rectification
• Charging Voltage Measurement: Resistive Divider
• Discharging Loop: 15kv/16UF 1piece
• Waveform Record: Oscillograph TDS2012c
• Preset Discharge Voltage: 0.5kv~28.0kv
• Installation: Portable Precise
• Accuracy: 1.5
• Theory: Electric Apparatus
• Application: Electronic Equipment, Electric Power
• Transport Package: Wooden Case
• Specification: ISO, SGS
• Trademark: HV Hipot
• Origin: Wuhan China
• HS Code: 8543709990
• Production Capacity: 500PCS/Year

Product Description

10kA Impulse Current Generator

Test Object: Voltage dependent resistor, Gas discharge tube, SPD etc.
Power supply: Single phase 220V/2A
 

Impulse  waveform
Short  circuit  current  waveform	8/20ms	Allowable  deviation
Wavefront  time	8ms	± 10%
Half  peak  time	20ms	± 10%
Current  range	1kA-10kA, Max. 12kA
Standard	Waveform  is  smooth, accorded  with  IEC  standard.

 

Major  loop	Constant  voltage  charge	Three  level  subsection,   charging  time	Max. 40secs
	Auto  ground	Electromagnet
	Transformer	AC  15kV/500VA
	Rectification	Half-wave  rectification	1pcs  high  voltage  silicon  stack
	Polarity	Positive  or  negative
	Charging  voltage  measurement	Resistive  divider
	Discharging  loop	capacitor	15kV/16uf    1piece
		capacity	1800J
		Wave-adjusting  resistor    1piece
		Wave-adjusting  inductance    1piece
		Discharge  ball	Control  switch
Measurement	Output  voltage  measurement	Resistive  divider
	Output  current  measurement	Rogowski  coil
	Waveform  record	oscillograph    TDS2012C
PC  part	PC	Laptop  or  Table  type  IPC
	Communication	Fiber  isolation
	Measurement  and  control  software	Set  charge  voltage,   discharge  times,   time  interval,   auto-setting  oscillograph,   auto-achieving  oscillograph  trace,   calculating  current  and  residual  voltage  peak  value,   calculating  current  wavefront  time, half  peak  time,   negative  form  vibrate,   data  and  waveform  auto-saving
Control  part	Program  control	PLC
	Preset  discharge  voltage	0.5kV~28.0kV  Digital  voltmeter, potentiometer, comparator
	Charging  voltage  display	DC  voltage  divider, digital  voltmeter
	Operation  button	Charging, HV  on, HV  off
	Indicator  light	HV  on