GDJS-65A Insulated Gloves & Boots Test Set Factory Price
General Information
GDJS-65A Insulation Gloves(Boots) Test Set is special equipment for batch test of insulated gloves (boots). The test procedure is simple and personnel security is guaranteed. Parameters such as leakage current, insulation aging and frequency voltage could be obtained reliably. It can test 6pcs insulated gloves (boots) at the same time.
The equipment is composed of power frequency voltage withstanding test device, special test electrode for insulating gloves(boots) and leakage ammeter. It has the advantages of simple wiring and detection, reasonable and reliable layout, convenient movement, flexible dis-assembly and assembly, etc.
Features
7inch color LCD screen, with PLC automation control.
HV Voltage, LV Current, LV voltage, LV current measured at the same time, with high precision sensor and high performance collection chip.
Automatic mode and manual mode for option.
Display HV voltage, LV voltage, LV current, time and withstand voltage result.
Over-voltage and over-current protection. Output voltage, HV current upper limit, LV current upper limit and timing can be set.
Zero-starting function. Test can be proceed after the voltage is back to zero.
Store up to 8000pcs data in 3months. It has USB port to upload data to USB disk.
When setting voltage is arrived, it will timing automatically. After timing, voltage will be back to zero.
When the LV current is over setting value, the voltage will be cut off automatically and it will be back to zero. After the flash-over protection value is exceeded, the automatic step-down zero protection is performed.
Software and hardware anti-interference design, a variety of anti-interference means, to adapt to harsh electromagnetic environment.
Automatic error diagnosis, easy to find and solve problems, simple equipment maintenance.
With wheels for gloves(boots) platform, easy to move.
Other features
Arbitrary combination of high voltage power source, test electrode and leakage ammeter, wiring operation is convenient and flexible.
HV source is oil immersed type testing transformer.
6 test barrels for simultaneous detection of 6 insulation gloves(boots).
To make test for insulation gloves and boots, the HV electrode is chain type, which the height can be adjusted. The material is stainless steel with CU/EpNi5bc painted, which make surface discharge<10pc.
The electrode of insulation boots is red cooper voltage-sharing type, the HV inside the bottom of boots are equal distribution. 4mm steel balls supplied, not using traditional way that injecting water.
Control unit and HV unit are separate, to ensure safety.
If there is breakdown or over limits, the HV output will be cut off automatically and alarm.
Audited Supplier 
){kind=link}