HVHIPOT 100KV 1A Auto Manual AC Hipot Test Set For Motor

Product Description

100KV 1A Auto Manual AC Hipot Test Set for motor

Application

GDYD-A-100kVA/100kV AC Hipot Tester adopts PLC controller technology, 2.4G ISM networking technology, combined with excellent man-machine interface operation, so that you can use it easily and conveniently.
It is composed of control unit and oil testing transformer (HV unit) which output AC voltage smoothly. Meanwhile, it has many monitoring and protection functions.

It can be used to conduct dielectric strength test under specified voltage for various electrical products, electrical components, insulating materials, etc., to assess the insulation level of products, find insulation defects of the tested product, and measure the ability of overvoltage. Widely used in electrical manufacturing departments, power operation departments, scientific research units and institutions of higher learning.



Features
 

1. 7inch color LCD screen, with PLC automation control.
2. HV Voltage, LV voltage, LC current measured at the same time, with high precision sensor and high-performance collection chip

1. Automatic mode and manual mode for option.
2. Display HV voltage, LV voltage, LV current, time and withstanding result.
3. Over-voltage and over-current protection. Output voltage, HV current upper limit, LV current upper limit and timing can be set.
4. Zero-starting function. Test can be proceeded after the voltage is back to zero.
5. Store up to 8000pcs data in 3months. It has USB port to upload data to USB disk.
6. When setting voltage is arrived, it will be timing automatically. After timing, voltage will be back to zero.
7. When the LV current is over setting value, the voltage will be cut off automatically and it will be back to zero. When the HV current is over setting value, the test object will be cut off and test can be proceeded continuously.
8. With anti-interference ability, suitable for electromagnetic environment.
9. With wheels for both control unit and HV unit, easy to move.

Technical Specifications
 

1. Control unit specifications

 

1. Power: AC380V±10%,50Hz or 60Hz±1
2. Capacity: 100kVA
3. Output voltage: AC 0-430V
4. Rated output current: 250A
5. HV voltmeter range: AC 0-100kV

   Accuracy: 1.5% of the reading±2digit (F.S)

1. HV ammeter range: 0-1A

   Accuracy: 1.5% of the reading±2digit (F.S)

1. LV ammeter range: 0-250A

   Accuracy: 2.0% of the reading±2digit (F.S)

1. Output waveform: 50Hz sine wave
2. 12. Alarm mode: sound and light alarm
3. Timing range:1s-900S

B. Testing transformer (HV unit) specifications
 

1. Input voltage: 0-400V
2. Input current: AC 0-25A
3. Output voltage: AC 0-100kV
4. Output current: AC 1000mA
5. Capacity: 100kVA
6. HV side/LV side turns ratio: 250:1
7. Measuring voltage: AC 0-100V

    Accuracy: 1.5% of the reading±2digit (F.S)

1. No-load current: <10%
2. Impedance voltage: <10%
3. Weight: about 258kg
4. Dimension: 610mm(L)*4380mm(W)*970mm(H)

C. Working conditions
 

1. Working place: No gas, steam, chemical dust and explosive and corrosive medium which will influence insulation.
2. Environment temperature: -20--50ºC
3. Environment humidity: ≤85% RH (no condensing)
4. Altitude: <1000m