Discharge Counter Performance Test Zinc Oxide Arrester Comprehensive Tester (GDYZ-301A)

• Mass Scope of Workpiece: 11kg
• Type: Auto Testing Machine
• Accuracy Grade: 1
• Load Way: Electronic Load
• Display: Digital
• Power Source: AC220V
• Model NO.: GDYZ-301A
• Oil Cylinder Position: no
• Input resistance of current channel: ≤1Ω
• Action times of monitor: 0 ~ 99 times
• Weight of main unit: 4kg (without accessories)
• Measurement resolution (Voltage): 0.001V
• Measurement resolution (Current): 0.001mA
• Measurement resolution (Angle): 0.001°
• Battery working time: Main unit 8 hours, voltage sampling box 12 hours
• Wireless transmission distance: 1000 meters and above (empty and Unobstructed)
• Dimension of main unit: 320*270*140mm
• Hand-held collection probe: 180*120*80mm
• Transport Package: Wooden Case
• Specification: ISO, SGS
• Trademark: HV HIPOT
• Origin: Wuhan China
• HS Code: 9030820000
• Production Capacity: 2000 Sets/Year

Product Description

General Information

GDYZ-301A Automatic Zinc Oxide Surge Arrester Tester contains below three functions,
Resistive current test
Current meter calibration of monitor
Counter action test of monitor

It is the special equipment of testing zinc oxide electric performance. The instrument can accurately and stably measure the arrester resistive current and the monitor counter action parameters while the equipment is running. It can also check the monitor ammeter.


Features

1. 8-inch color LCD touch screen, high speed thermal printer.
2. The measurement data of wire and wireless is the same.
3. Wireless sampling, with long distance.

   A. Wired: indoor use, or onsite where the PT sampling wiring cabinet is near with tested lightning arrester.
   B. Wireless: outdoor use, or onsite where the PT sampling wiring cabinet is far from tested lightning arrester, wireless distance is up to 1000M.

1. Three-phase can be measured at the same time. The resistive current of 3channels can be measured at the same time, meanwhile, there are two interference modes, 1) no interference: the interphase angle cannot be calculated and corrected automatically under this mode;2) With interference: the interphase interference angle can be calculated and corrected. Only one time connection to finish measurement of ABC phase.

Built-in high capacity Li-battery, suitable for no power supply field.


Specifications

Use condition	-20ºC ~ 50ºC	RH<80%
Charging power supply	AC 220V±10%
Input range of PT reference voltage	0 ~ 300V
Input resistance of voltage channel	≥150kΩ(with fuse)
Measuring accuracy of PT reference voltage	±(2% of the reading+0.5V)
Measuring range of current input	0-10mA
Measurement accuracy of current fundamental	±(2% of the reading+5μA)
Measurement accuracy of current harmonic	±(5% of the reading+10μA)
Input resistance of current channel	≤1Ω
Action times of monitor	0 ~ 99times
8/20μS impulse current	≥50Ap
Calibration range of current meter	0 ~ 10mA
Calibration accuracy of current meter	±(2% of the reading+5μA)
Measurement resolution	Voltage	0.001V
	Current	0.001mA
	Angle	0.001°
Battery working time	Main unit 8 hours, voltage sampling box 12 hours
Wireless transmission distance	1000 meters and above (empty and Unobstructed)
Dimension of main unit	320*270*140mm
Hand-held collection probe	180*120*80mm
Weight of main unit	4kg (without accessories)

Accessories

Main unit	1piece
Sampling unit	1piece
Wireless communication unit	1piece
Sensing board	1piece
Accessory case	1piece
Measurement cable of 3-phase resistive current	1piece
Sampling cable of 3-phase voltage	1piece
Output cable of current meter calibration	1piece
Communication cable	1piece
Ground cable	1piece
Power cable	1piece
Charger	1piece
Fuse	3pcs
Print paper	1roll