Leakage Current Test Zinc Oxide Lightning Arrester Characteristic Tester (GDYZ-301A)

• Customization: Available
• Use condition: -20ºC ~ 50ºC, RH<80%
• Charging power supply: AC 220V±10%
• Model NO.: GDYZ-301A
• Input range of PT reference voltage: 0 ~ 300V
• Input resistance of voltage channel: ≥150KΩ (with fuse)
• Measuring accuracy of PT reference volta: ±(2% of the reading+0.5V)
• Measuring range of current input: 0-10mA
• Measurement accuracy of current fundamen: ±(2% of the reading+5μA)
• Measurement accuracy of current harmonic: ±(5% of the reading+10μA)
• Input resistance of current channel: ≤1Ω
• Action times of monitor: 0 ~ 99 times
• 8/20μS impulse current: ≥50Ap
• Calibration range of current meter: 0 ~ 10mA
• Calibration accuracy of current meter: ±(2% of the reading+5μA)
• Transport Package: Wooden Case
• Specification: ISO, SGS
• Trademark: HV Hipot
• Origin: Wuhan China
• HS Code: 9030820000
• Production Capacity: 2000PCS/Year

Product Description

General introduction

GDYZ-301A Automatic Zinc Oxide Surge Arrester Tester contains below three functions,
Resistive current test
Current meter calibration of monitor
Counter action test of monitor

It is the special equipment of testing zinc oxide electric performance. The instrument can accurately and stably measure the arrester resistive current and the monitor counter action parameters while the equipment is running. It can also check the monitor ammeter.



Features

1. 8inch color LCD touch screen, high speed thermal printer.
2. The measurement data of wire and wireless is the same.
3. Wireless sampling, with long distance.

   A. Wired: indoor use, or onsite where the PT sampling wiring cabinet is near with tested lightning arrester.
   B. Wireless: outdoor use, or onsite where the PT sampling wiring cabinet is far from tested lightning arrester, wireless distance is up to 1000M.

1. Three-phase can be measured at the same time. The resistive current of 3channels can be measured at the same time, meanwhile, there are two interference modes, 1) no interference: the interphase angle cannot be calculated and corrected automatically under this mode;2) With interference: the interphase interference angle can be calculated and corrected. Only one time connection to finish measurement of ABC phase.
2. Built-in high capacity Li-battery, suitable for no power supply field.

Technical Parameters

Use condition	-20ºC ~ 50ºC	RH<80%
Charging power supply	AC 220V±10%
Input range of PT reference voltage	0 ~ 300V
Input resistance of voltage channel	≥150kΩ(with fuse)
Measuring accuracy of PT reference voltage	±(2% of the reading+0.5V)
Measuring range of current input	0-10mA
Measurement accuracy of current fundamental	±(2% of the reading+5μA)
Measurement accuracy of current harmonic	±(5% of the reading+10μA)
Input resistance of current channel	≤1Ω
Action times of monitor	0 ~ 99 times
8/20μS impulse current	≥50Ap
Calibration range of current meter	0 ~ 10mA
Calibration accuracy of current meter	±(2% of the reading+5μA)
Measurement resolution	Voltage	0.001V
	Current	0.001mA
	Angle	0.001°
Battery working time	Main unit 8 hours, voltage sampling box 12 hours
Wireless transmission distance	1000 meters and above (empty and Unobstructed)
Dimension of main unit	320*270*140mm
Hand-held collection probe	180*120*80mm
Weight of main unit	4kg (without accessories)