HV HIPOT Multi-function high voltage impulse generator test system with high precision

• After-sales Service: Yes
• Warranty: 1 year
• Type: Universal Testing Machine
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Model NO.: GDCY-400kV/30Kj
• Display: Digital
• Control: Computer Control
• Weight: 500-1000Kg
• Power Source: AC380V
• Rated sstage voltage: 100kV
• max. charging current: 10A
• Transport Package: Standard Export Plywood Case
• Specification: ISO9001
• Trademark: HV Hipot
• Origin: Wuhan, China

Product Description

GDCY-400KV/30KJ  Impulse Voltage Generator High Voltage Test System 

General information

The impulse voltage generator is a device that generates impulse voltage waves. It is used to check the insulation performance of power equipment withstand atmospheric overvoltage and operating overvoltage. The impulse voltage generator can generate standard lightning impulse voltage waveforms, lightning impulse voltage cutoff, standard operation impulse voltage waveforms, etc. and user-specified non-standard impulse voltage waves (including steep waves).
GDCY series impulse voltage generator can carry out impulse voltage test and other scientific research on insulators, long air gaps, bushings, CT/PT, transformers and other samples.

Technical Specifications
 

1. The altitude of installation and use does not exceed 1000 meters
2. Ambient air temperature: -20ºC~+40ºC, relative humidity of air is not more than 85% (20ºC)
3. No conductive dust exists
4. No fire and explosion hazards
5. Does not contain gas and steam that corrode metals and insulation
6. No severe vibration, collision and strong bumps
7. The horizontal level of the ground does not exceed 3 degrees, and the unevenness of the ground of the mobile device is ±1mm/2 mm.
8. The waveform of the power supply voltage is a sine wave, the waveform distortion rate is less than 3%, and the frequency is 50Hz. The power supply side should not be impact to overvoltage from the outside.
9. There is a reliable grounding point, the grounding grid should have good impact characteristics, the grounding resistance should not be greater than 0.5Ω in steady state, and the grounding point should be near the main body.
10. The safety distance of GDCY-400 impulse voltage generator is shown in the following table:

Rated voltage (kV)	50	100	150	200	300	400
Min. distance(m)	0.5	0.8	1	1.5	2.5	3

Technical Parameters
 

1. Rated sstage voltage: 100kV, max. charging current 10A
2. Output voltage waveform.Under different rated voltages and a certain load capacitance, a full wave of lightning impulse voltage of ±1.2/50μS can be generated.
3. Voltage utilization factor: Equipped with certain impact capacitors in different load capacitors to generate 1.2/50μS lightning impulse voltage waves, the utilization factors are not less than 0.85. Lightning shock wave interception, the utilization coefficients are not less than 0.75;
4. Duration of use: charge and discharge every three minutes above 2/3 rated voltage, continuous operation, and below 2/3 rated voltage, charge and discharge every two minutes, continuous operation.