| Customization: | Available |
|---|---|
| After-sales Service: | YES |
| Warranty: | 1 year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency

| Functions | Measure 3-phase AC voltage, current, phase between voltage, phase between current, phase between voltage and current, frequency, phase sequence, active power, reactive power, apparent power, power factor, current vector sum; Distinguish transformer wire group, inductive and capacitive circuit; Test secondary circuit and bus differential protection system; Read phase relation between each group CT of DP, check if the wire is correct or not. | ||
| Power Supply | DC9V alkaline batteries(1.5V AA×6) | ||
| Consumption | About 80mA at most with enabled backlight, battery working continuously for about 10 hours | ||
| About 50mA with disabled backlight, battery working continuously for about 16hours | |||
| Display | LCD display, blue backlight, suitable for dark places | ||
| LCD Size | 240dots*160dots | ||
| Meter Size | Length, Width, Height: 196mm×92mm×54mm | ||
| Sampling Rate | About 3 times/second | ||
| Measurement Range | AC Voltage: 0.00V-600V(automatic adjustable) AC Current: 0.0mA-400A(automatic adjustable) Phase: 0.0°-360.0° Frequency: 45.00Hz-65.00Hz Active power: 0.0W-240kW Reactive power: 0VAR-240kVAR Apparent power: 0VA-240kVA Power factor: -1--+1 Current vector sum: 0A-1200A |
||
| Data Hold | Press HOLD key to keep data, "DH" symbol appears | ||
| Automatic Shutdown | Automatic shutdown about 15 minutes later after launching to reduce battery consumption | ||
| Voltage Detection | Low battery symbol appears to remind the replacement of battery when the battery voltage drops below 7.2V. | ||
| Weight | Main Unit about 550g(with battery),round mouth clamp: about 185g*3, test wire: 250g | ||
| Test Wire Length | 1.5m | ||
| Current Clamp Length | 2m*φ5mm | ||
| Input Impedance | Input impedance for all test voltage range: 2MΩ | ||