HVHIPOT AC Resonant Test Systems for Substation (GDTF-HTS)

• Customization: Available
• Rated Output Voltage: 0 ~ 800kv (AC ) and Below
• Output Frequency: 20 ~ 300Hz
• Model NO.: GDTF-HTS
• The Maximum Test Capacity: 1000kVA and Below
• Duty Cycle: Full Power Output: a Continuous Working Time 15min
• Quality Factor: 30 ~ 90
• Frequency Adjustment Sensitivity: 0.1Hz, Instability of <0.05%
• Transport Package: Carton or Wooden Case
• Specification: ISO, SGS
• Trademark: HV Hipot
• Origin: Wuhan China
• HS Code: 9030339000
• Production Capacity: 2000PCS/Year

Product Description

General introduction

Substation Electrical Apparatus AC Resonant Test Systems is mainly composed of frequency conversion control power, incentives transformers, reactors, capacitor divider, designed for substation electric equipment AC withstand voltage test of the voltage with 220KV or below. It satisfy capactive equipment AC withstand voltage test of transformer, GIS systems, SF6 switches, cables, casing.

This Series can meet high voltage, low current device test conditions requirement, also meet low voltage, high current device test conditions requirement, with a wide scope of application, is ideal test equipment for power department, repair engineering units and high voltage testing deparment.

Features

1. Smaller size, lighter weight compared with same voltage level, same capacity reactor.
2. Small temperature rise at rated load. Dry type epoxy cast, high mechanical strength, good insulation, nice and reliable.
3. Large capacity margin for frequency control source. Strong protection, good stability. with multiple working mode, easy to operate.
4. with 220V or 380V single phase power, convenient for onsite power sourcing.
5. Flexible configuration. Different type reactors for optional, can meet different test object requirements. Multifunctional, cost effective.
6. Imported SPWM digital waveform generated chip. 16 digit frequency resolution. Frequency fineness up to 0.1Hz at frequency of 20-300Hz.
7. Orthogonal non-synchronous fix type carrier modulation mode, ensure good output waveform for the entire frequency range.
8. Advanced IPM module, ensure stability and security of apparatus.

Technical Parameters
 

Rated output voltage	0 ~ 800kV (AC ) and below
Output frequency	20 ~ 300Hz
Waveform	Pure sine wave, THD <1.0%
The maximum test capacity	1000kVA and below
Duty Cycle	Full power output, a continuous working time 15min
Quality factor	30 ~ 90
Frequency adjustment sensitivity	0.1Hz, instability of <0.05%
Power Supply	380/220V+/-15% / 50Hz+/-5%

Product Configuration
 

GDTF-108/108
Input voltage (V)	380
Output voltage (kV)	0-108
Capacity (kVA)	108
Application scope	31500kVA or below
	35kV power transformer
	35kV circuit breaker and bus bar,insulators
	10kV (300 mm²) cable 2000m
	35k V(300 mm²)cable 500m
Main configurations	5kW Variable frequency source 1 set
	5kVA Exciting transformer 1 set
	Reactors 27kV/1A 4sets
	Capacitive divider 100kV
GDTF-216/216
Input voltage (V)	380
Output voltage (kV)	0-216
Capacity (kVA)	216
Application scope	110kV Circuit breaker and bus bar
	110kV GIS
	35kV(300 mm²) cable 1500m
	10kV(300 mm²) cable 3km
	110kV full insulation Transformer
Main configurations	10kW Variable frequency source 1 set
	10kVA Exciting transformer 1 set
	Reactors 54kV/1A 4sets
	Capacitive divider 200kV
GDTF-270/270
Input voltage (V)	380
Output voltage (kV)	0-270
Capacity (kVA)	270
Application scope	110kV GIS and transformer
	110kV GIS and transformer
	35kV (300 mm²) cable 2km
Main configurations	15kW Variable frequency source 1 set
	15kVA Exciting transformer 1 set
	Reactors 54kV/1A 5sets
	Capacitive divider 300kV
GDTF-200/400
Input voltage (V)	380
Output voltage (kV)	0-400
Capacity (kVA)	200
Application scope	220kV GIS and transformer
	110kV GIS and transformer
Main configurations	10kW Variable frequency source 1 set
	10kVA Exciting transformer 1 set
	Reactors  100kV/0.5A 4sets
	Capacitive divider 400kV
GDTF-400/400
Input voltage (V)	380
Output voltage (kV)	0-400
Capacity (kVA)	400
Application scope	220kV GIS and transformer
	10kV (300 mm²) cable 4km
	35kV (300 mm²) cable 1km
Main configurations	20kW Variable frequency source 1 set
	20kVA Exciting transformer 1 set
	Reactor  100kV/ 1 A 4sets
	Capacitive divider 400kV
GDTF-520/260
Input voltage (V)	380
Output voltage (kV)	0-260
Capacity (kVA)	520
Application scope	110KV Circuit breaker and bus bar
	110kV GIS
	110kV (300 mm²) cable 800m
	35kv (300 mm²) cable 3km
	10kV (300 mm²) cable 6km
	110kv full insulation Transformer
Main configurations	25kW Variable frequency source 1 set
	25kVA Exciting transformer 1 set
	Reactor 65kV/2A 4sets
	Capacitive divider 300kV
GDTF-500/500
Input voltage (V)	380
Output voltage (kV)	0-500
Capacity (kVA)	500
Application scope	220kV or below CT/PT
	220kV or below bushing
	220kV or below Insulators, disconnectors
	220kV or below Circuit breaker
	220kV or below Insulation Instrument
Main configurations	20kW Variable frequency source 1 set
	20kVA Exciting transformer 1 set
	Reactor 125kV/1A 4sets
	Capacitive divider 500kV
GDTF-600/600
Input voltage (V)	380
Output voltage (kV)	0-600
Capacity (kVA)	600
Application scope	110kV (300 mm²) cable 800m
	35kv (300 mm²) cable 110m
	35-220kV GIS ,transformers, insulators
Main configurations	30kW Variable frequency source 1 set
	30kVA Exciting transformer 1 set
	Reactor 120kV/1A 5sets
	Capacitive divider 600kV
GDTF-800/800
Input voltage (V)	380
Output voltage (kV)	0-800
Capacity (kVA)	800
Application scope	110kV (300 mm²) cable 800m
	220kv (300 mm²) cable 500m
	35-500kV GIS ,transformers,insulators
Main configurations	40kW Variable frequency source 1 set
	40kVA Exciting transformer 1 set
	Reactor 200kV/1A 4sets
	Capacitive divider 800kV