HVHIPOT 0~32kV Underground Cable Fault Locator Cable Fault Test System

• Customization: Available
• Connectors: USB
• Usage: Cable Testing
• Model NO.: GD-4136H
• Cable Type: HV Cable, Communication Cable
• Power: Electricity
• Certification: ISO
• Customized: Non-Customized
• Color: Yellow
• Power Supply: AC 220V; 50Hz
• Output voltage: DC 0-32kV (adjustable)
• Rated power: 2kVA
• Max.energy: 2048J, 4UF
• DC flashover voltage: 32kV
• DC flashover current: 63mA
• Max.impulse current: 500mA
• Discharging method: DC HV, one time, cycle
• Cycle discharging time: 3-6 seconds
• Transport Package: Wooden Case
• Specification: ISO, SGS
• Trademark: HV Hipot
• Origin: China
• HS Code: 9030332000
• Production Capacity: 1000PCS/Year

Product Description

Product Description

GD-4136H Cable Fault system is important tool to maintain all kinds of cables. It uses various detection way to test cable faults, which is suitable for different levels voltage power cables and communication cables.
 
The system contains below units:
1.GD-2131H Impulse Generator
2.GD-4132 Cable Fault Locator
3.GD-4133 Multi-pulse Cable Fault Tester
4.GD-4133S Multi-pulse Coupler
5.Other accessories

GD-2131H Impulse Generator
It's used to generate HV impulse when using impulse flashover method to detect high impedance fault.
 
Features

Strong burning ability, max.burning power is 1000W, breakdown point can be burned in short time and the resistance of breakdown point is decreased.
If working together with GD-2133 Cable Fault Tester, there are two locating ways:
a. Low voltage pulse: If only using GD-2133, open circuit and low impedance grounding faults of cable can be located, and the length of cable can be measured or wave speed of cable can be detected.
b. High voltage flashover: The discharging pulse voltage waveform of fault point is sampled by discharging sphere gap, which can locate fault distance.
Generate impulse of fixed frequency. If working together with GD-2132 Cable Fault Locator, there are following functions:
a. Audio frequency: locate high impedance, flashover faults.
b. To pinpoint cable's route, identify special cable.
c. To metallic breakdown(dead grounding), using magnetic-field measurement to locate accurately.
It also can be used in DC HV withstand test. 

Specifications
 

Input power supply	AC 220V,50Hz
Output voltage	DC 0-32kV (adjustable)
Rated power	2kVA
Max.energy	2048J, 4uF
DC flashover voltage	32kV
DC flashover current	63mA
Max.impulse current	500mA
Discharging method	DC HV, one time, cycle
Cycle discharging time	3-6 seconds
Environmental temperature	0-40ºC
Humidity	<75% RH
Altitude	<1000m
Insulation level	A
Dimension	430*540*410mm
Weight	About 31kg

 
GD-4132 Cable Fault Locator

Including main unit, acoustic and magnetic sensor, anti-noise headphone and charger.
It is suitable to test all kinds of power cable with metallic conductor.
Its main function is locating poor insulation point, detecting circuit and depth of power cable.
 
Features

1. Acoustic Magnetic receiving at the same time,
2. Strong anti-interference ability
3. With anti-noise headphone.
4. 320*240 LCD screen display
5. Built-in big capacity Li-battery, with fast charger.
6. Acoustic and Magnetic signal waveform display, signal and noise is easy to distinguish.
7. Using cursor to measure acoustic and magnetic delay, accurately determine fault point.
8. According to initial polarity of magnetic.waveform, it can locate and route detection.
 
Specifications
 

Locating function	a. Acoustic signal transmission band: center frequency 400Hz, bandwidth 200Hz b. Signal gain: 80dB c. Locating accuracy: 0.1m
Power Supply	a.Built-in Li-battery, nominal voltage 7.4V, capacity 3000mAH. b.Power consumption: 300mA, continuous working time 9hours. c.Charger: input AC220V±10%, 50Hz. Nominal output 8.4V, DC 1A d.Charging time: 4hours
Dimension	270mm*150mm*210mm
Weight	1.5kg.
Use condition	Temperature -10ºC--40ºC, humidity 5-90%RH, altitude <4500m

 
GD-4133 Cable Fault Detector

GD-4133 Cable Fault Locator is used to measure distance between cable faults. It's easy to operate and with friendly interface.
It can be used alone under the low voltage pulse mode. Under the mode of pulse current, it needs to work with GD-2131 high voltage generator. Under the multiple pulse mode, GD-4133S coupler should be worked together. After distance locating, GD-4132 fault locator should be used for fault pinpointing. These products can be combined into a set of high performance and innovative cable fault testing system.
 
Features

1. 7inch LCD screen, friendly interface.
2. Multiple distance locating method:
a. Low voltage pulse method: it is suitable for the locating of the low resistance fault, short circuit fault, open circuit fault. It also can be used in the measurement of the cable length, the intermediate joints, T joints, and cable termination joint. This method also can be used to correct the wave velocity.
b. Pulse current method: It is suitable for distance measurement of the high resistance fault, breakdown fault. Using the current coupler to collect signals from the earth wire, it makes the user far away from the high voltage. This method is safe and reliable. 
c. Multiple pulse: the advanced way to measure distance. The waveform is easy to identify and the accuracy is high.
3. 200MHz real-time sampling. Max. 0.4m measurement resolution. It has small dead zone and is special for the short cable and near fault cable.
4. Touch screen and press key operation
5. PIP copy(pic. temporary storage)
6. There will be a main window and three temporary storage windows could check three waveforms together.
7. Built-in operating system
8. Special software management for software upgrade, backup and restore.
Scale function
A starting point,10 contacts, one cable fault and one full length could be setting. 
Display scale and testing waveform together
Waveform storage and communication with computer.
Internal storage of waveforms.
With USB, to download or upload data
Communication with computer
Power management
Backlight weakens if no operation in 2mins and power off in 10mins if no operation. 
Built-in Polymer Lithium-ion battery. 
Working time is up to 5 hours for each use. 
Strong case, easy to carry.
 
GD-4133S Multiple Pulse Coupler

It is working together with GD-4133 Cable Fault Detector, used for detecting high impedance leak fault, flashover fault, low impedance earth and open circuit fault of power cables. GD-4133S supplied pulse coupling signal for GD-4133 and isolate it from high voltage equipment.
 
Features

Using the most advanced technology of multiple pulse and pulse balance. The reflected waveform is more easy to identify.
With safety HV protection, the measuring circuit and high voltage impulse power is electrically isolated.
Easy wiring, safe and reliable.

Specifications
 

Pulse voltage	300V(P-P)
Allowable input impulse voltage	<35kV
Allowable input impulse energy	<2000J
Power input	220V AC, 50Hz
Dimension	560*230*220mm
Weight	7kg.