HVHIPOT Clamp Digital Phase Meter (GDCR4200) Motor Phase Rotation Tester

• Customization: Available
• After-sales Service: YES
• Warranty: 1
• Model NO.: GDCR4200
• Model number: GDCR4200
• Power: DC9V alkaline batteries(1.5V LR6*6)
• AC voltage: 0-20V/200V/500V
• AC Current: 0-200mA/2A/10A
• Delivery time: 15working days
• Transport Package: Carton
• Specification: ISO, SGS
• Trademark: HV Hipot
• Origin: Wuhan China
• Production Capacity: 10000 Sets/Year

Product Description

General information

GDCR4200 Clamp Digital Phase Meter is a well-developed multi-functional meter specifically designed for field testing, featuring high accuracy, high stability, low power consumption, easiness to use and so on. It can directly measure AC voltage and AC current opening the measured circuit, phases between two voltages, two currents and phase between the voltage and current. In addition, the power factor and power of the circuit can be indirectly measured, it can also be used to distinguish transformer wiring group, inductive and capacitive circuits, test second circuit and bus differential protection systems, read the phase relationship between CTs of the differential protection, check the meter wiring right, repair lines and equipment, etc. 


Specifications
 

Functions	Phase, AC current, AC voltage, AC leak current, Phase sequence direct test, transformer group, induction, capacitive circuit determination, power factor, indirect test between power.
Power Supply	DC9V alkaline batteries(1.5VLR6×6)
Consumption	About 35mA at most with enabled backlight, battery working continuously for about 40 hours
	About 5mA with disabled backlight, battery working continuously for about 300hours
Measurement type	4-pole, 3-pole, 2-pole earth resistance measurement.
Display	LCD display, blue backlight, suitable for dark places
LCD Size	70mm*62mm, display area 64mm*54mm
Meter Size	Length, Width, Height: 192mm×92mm×50mm
Sampling Rate	About 3 times/second
Measurement Range	AC Voltage: 0-20V/200V/500V AC Current: 0-200mA/2A/10A Phase: 0°-360°
Amplitude range when measuring phase	When test U1-U2 phase: 30V-500V When test I1-I2 phase: 10mA-20.00A When test U1-I2 or I1-U2 phase: 10V-500V, 10mA-10.00A
Data Hold	Press HOLD key to keep data, "DH" symbol appears
Automatic Shutdown	Automatic shutdown about 15 minutes later after launching to reduce battery consumption
Voltage Detection	Low battery symbol appears to remind the replacement of battery when the battery voltage drops below 7.8V-8V.
Weight	Main Unit about 550g(with battery),clamp about 170g*2, test wire: 250g
Test Wire Length	1.5m
Current Clamp Length	2m
Input Impedance	Input impedance for all test voltage range: 2MΩ Voltage input impedance when test U1 U2 phase: 40kΩ