GDJS-65A Automatic Insulation/Insulated gloves(boots) Test set/Tester
Picture only for reference
(PLC Control Box+Oil Type Transformer+Insulation Gloves/boots Electrode-6 barrels)
It is used to test insulation performance for 35kV and below insulation gloves, boots. It can test six insulation gloves/boots at one time.
Features
- Automatic control unit
- 7inch color LCD screen, with PLC automation control.
- HV Voltage, LV Current, LV voltage, LV current measured at the same time, with high precision sensor and high performance collection chip.
- Automatic mode and manual mode for option.
- Display HV voltage, LV voltage, LV current, time and withstand voltage result.
- Over-voltage and over-current protection. Output voltage, HV current upper limit, LV current upper limit and timing can be set.
- Zero-starting function. Test can be proceed after the voltage is back to zero.
- Store up to 8000pcs data in 3months. It has USB port to upload data to USB disk.
- When setting voltage is arrived, it will timing automatically. After timing, voltage will be back to zero.
- When the LV current is over setting value, the voltage will be cut off automatically and it will be back to zero. After the flash-over protection value is exceeded, the automatic step-down zero protection is performed.
- Software and hardware anti-interference design, a variety of anti-interference means, to adapt to harsh electromagnetic environment.
- Automatic error diagnosis, easy to find and solve problems, simple equipment maintenance.
- With wheels for gloves(boots) platform, easy to move.
Other features
- Arbitrary combination of high voltage power source, test electrode and leakage ammeter, wiring operation is convenient and flexible.
- HV source is oil immersed type testing transformer.
- 6 test barrels for simultaneous detection of 4 insulation gloves(boots).
- To make test for insulation gloves and boots, the HV electrode is chain type, which the height can be adjusted. The material is stainless steel with CU/EpNi5bc painted, which make surface discharge<10pc.
- The electrode of insulation boots is red cooper voltage-sharing type, the HV inside the bottom of boots are equal distribution. 4mm steel balls supplied, not using traditional way that injecting water.
- Control unit and HV unit are separate, to ensure safety.
- If there is breakdown or over limits, the HV output will be cut off automatically and alarm.
Specifications
- Rated capacity: 5kVA
- Input voltage: AC220V±10%, 50Hz±1
- Output voltage: 0-50kV
- Voltage accuracy: ≤ 2.5%(F.S)
- LV current: 0-25A
- Leak current: 0-30.0mA
- Resolution of leak current: 0.1mA
- Current accuracy: ≤2.0%
- Timing range: 0-99.9H
- Environmental temperature: -20ºC-50ºC
- Environment humidity: ≤85% RH (no condensing)
The set of equipment including:
Control unit 1 piece
Testing transformer 1 set
Movable barrel with 6 milliammeters 1 set
Output cable(2-core) 1 piece
HV cable 2 pcs
Voltage measuring cable (2-core) 1 piece
Ground cable 1 piece
Power cord 1 piece
Metal shoe-pad 6 pcs
Sponge 6 pcs
Steel ball 6 pcs
User's guide 1 piece
Test report 1 piece
Audited Supplier 
){kind=link}